S.Balubhai & Co.

 Servicing Customers with Quality Products since 1963

 
Home About Us Products Quality Policy Partner with us Contact Us                             
   
Cast Iron Ball Valves Screwed 1 Pc. Design

BACK

        
Salient Features :
ABV - 4-16
 
 
Design :
Cast Iron Ball Valves BSP Screwed Female Ends One Piece Design having S S Ball supported by PTFE rings, Flat Lever attached from l5mm to 50mm & S.G. Iron Handle attached from 65mm to 100mm.
NOTE : A detachable Pipe Handle is supplied with this Valve (from 65mm to 100mm) to be attached with S.G. Iron Handle while installing/operating.
   
Range : 15mm to 100mm.
   
Operation

Marking 		:

:		 Quick opening by quarter turn operation.

One side of body "ALTO" & "Size".
Other side of body "Tested 34kg/cm²".
     
Utility : Fuel oils, kerosene oils, compressed air, gases,  low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations.
     
Temp. Range : 10° C to 200° C.
   
Testing : Hydraulically
Test Pressure Max C.W.P
Body Seat Body/Seat
500
PSI		 34
kg/cm²		 300
PSI		 20
kg/cm²		 200
PSI		 14
kg/cm²
   
DIMENSIONS : (in mm)
Size (in mm) A B* C*
15 80 61 100
20 86 68 105
25 95 75 125
32 115 105 173
40 121 105 173
50 133 105 200
65 155 124 354
80 178 136 354
100 218 187 428
Tolerance : ±1.5 mm in 'A'. *Approx
 
  
 
MATERIALS :
Components Material Specification
Body Cast Iron IS : 210 Gr. FG-200
Ball Stainless Steel AISI-202/304/316
Stem & Gland Bush Stainless Steel AISI-410/202/304/316
Nuts, Stopper & Lever Mild Steel IS : 226
Handle S.G. Iron IS : 1865 Gr.450/10
Body Seat Rings, Gland Packing & Stem Seal P T F E ---
Lever/Pipe Sleeve P.V.C P.V.C
 
LEADER

CS/FS Ball Valves

GM/CI Ventur Port Ball Valves

BRASS BALL VALVES   PN 20

FORGED STEEL BALL VALVE-BS5351  
CAST STEEL FIRE SAFE BALL VALVE CLASS 150, 300        
AURUM

Bronze Ball Valve Screwed Ends

Bronze Ball Valve Flanged Ends Stainless Steel Ball Valve Screwed Ends Brass Ball Valve Screwed Ends, Nickel-Chrome Plated  
Brass Ball Valve Screwed Ends, 3 piece design        
AUDCO
Reduced Bore Ball Valves (3-piece design) Energymiser Ball Valves Reduced Bore Ball Valves   (1-piece design) Full Bore Ball Valves  
Full Bore Ball Valves    (3-piece design) Ecoseal Ball Valves Trunnion Mounted Ball Valves High Pressure Ball Valves  
Reduced Bore Ball Valves (2-piece design)        
ALTO
Cast Iron Ball Valves Screwed 1 Pc. Design Cast Iron Ball Valves Flanged 1 Pc. Design Ball Valve Screwed
3 Pc. Design		 Ball Valve Flanged
3 Pc. Design		  
 
GATE VALVES CHECK VALVES BALL VALVES GLOBE VALVES PISTON VALVES
PLUG VALVES STOP VALVES SAFETY/ RELIEF VALVES PRESSURE REDUCING VALVES  AIR RELEASE VALVES
BUTTERFLY VALVES NON RETURN VALVES PARALLEL SIDE & BLOW OFF VALVES  FOOT  VALVES   SLUICE  VALVES
REFLUX  VALVES LIFT  VALVES COCKS TRAPS & STRAINERS FUSSIBLE PLUGS, INJECTORS & EJECTORS

 
                                                 
                                                 

Home       About Us      Products     Quality Policy    Partners with Us     Contact Us

Products of : M/s Leader Valves Ltd. - M/s Aurum - M/s Audco India Ltd. - M/s Alto Industries - M/s Kirloskar Brothers Ltd.

  Products : Valves    Pipe Fittings    Flanges   Pipes   Pressure Gauges

Type of Valves : Gate Valve - Globe Valves -Ball Valves - Non Return Valves - Spring Relief Valves - Strainer,Trap & Gauge Glass Cock - Cast Iron Butterfly Valve
 

S.Balubhai & Co. - 238, Nagdevi Street, Mumbai - 400 003 - Tel.No.:+91 22 2342 6338  - Fax No.:+91 22 2344 1883 - email : sales@sbalubhai.com

   © 2009 S. Balubhai & Co.